CentOS – network cards add bulk to different IP segment

Single network adapter batch adding different IP segment
70.39.112.194 added IP:70.39.112.195-222/70.39.83.226-254

vi /etc/sysconfig/network-scripts/ifcfg-eth0-range0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR_START=70.39.112.195
IPADDR_END=70.39.112.222
CLONENUM_START=0
GATEWAY=70.39.112.193
NETMASK=255.255.255.224
NO_ALIASROUTING=yes

service network restart

Corresponding to ifconfig and see IP:70.39.112.195-222 card number: eth0:0-eth0:27,
Bulk add IP, network card since eth0:28 started on the line,
Network card eth0 does not change, create a new file: ifcfg-eth0-Range1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
/Sysconfig/network-scripts/ifcfg-eth0-Range1 # note that this second

DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR_START=70.39.83.226
IPADDR_END=70.39.83.254
CLONENUM_START=28 # Note that this second
GATEWAY=70.39.83.225
NETMASK=255.255.255.224
NO_ALIASROUTING=yes